Pool Table Removal

Pool tables carried out of garages, game rooms and converted bonus rooms and hauled away, slate tables included. We take it apart on site the same way it was built: rails off first, then the slate lifted out in its own pieces, the wood frame and legs cut down only if a doorway won't clear them whole. The felt and the pocket rails go too. Serving Downey, Whittier, Santa Fe Springs, Pico Rivera and nearby cities, 7 days a week. Text us slate or non-slate and we'll get it on the schedule.

The room needs to be something else now

A pool table almost never comes down because it broke. It comes down because the game room is becoming a home office, or the kids stopped playing years ago, or the house is going on the market and a staging agent flagged it as dead space in the photos.

A fair number of people have already tried Marketplace first. Sometimes a buyer bites, then disappears once they realize the table has to come apart and a few hundred pounds of slate has to move before it's theirs.

It's still a table worth something to somebody. It's just also several hundred pounds of stone, wood and steel sitting in the way of what the room needs to become next.

Illustration: A worn pool table with a sagging corner pocket in a converted garage game room, boxes stacked against the wall

What comes out

  • Slate and non-slate pool tables
  • Rails and pocket hardware
  • Slate, lifted out in its original pieces
  • The wood frame and legs
  • Cue racks and accessories
  • Hauled off once the trailer's loaded

How the table comes apart

  1. Tell us whether the table is slate or not, and if there are stairs between it and the door.
  2. Rails come off first, then the slate is lifted out piece by piece, the same way every slate table has moved since it was delivered new.
  3. The frame and legs separate at the same joints they were built with. We cut the wood down with a saw only when a doorway won't clear it whole.
  4. Every piece goes out to the trailer, and the room gets cleared.

Before we get there

  • Tell us slate or non-slate if you know.
  • Clear space around the table to work.
  • Tell us about stairs or a narrow garage door.

What kind of table you have

  • Standard 8-foot slate. Three-piece slate, roughly 170 pounds a piece at 1-inch thick. The most common table in a home garage or game room.
  • 9-foot slate. Bar and tournament size. Each of the three slate pieces runs closer to 230 pounds, and 1.5-inch slate pushes toward 275.
  • Non-slate, MDF or slatron bed. A lighter bed material, often well under 300 pounds whole. An easier job than a slate table.
  • Bar-size and smaller tables. Lighter across the board, though plenty still run slate. Worth telling us the size when you book.

Getting a few hundred pounds of stone out of a garage

Why nothing here gets carried whole

A standard 8-foot slate table runs north of 700 pounds assembled, before anyone reaches a doorway. That's not a tight-fit problem, it's a no-one-can-lift-this problem, which is why the table leaves in the same three groups it arrived in: rails, slate, frame.

The slate takes the most care. Each piece runs 170 to 275 pounds depending on the table's size and thickness, and a piece racked at an angle or set down wrong can crack, or crack the tile or subfloor underneath it. We keep it flat, keep it low, and move one piece at a time.

Most SoCal game rooms sit in a converted garage or a bonus room, usually one garage door or one narrow stairwell doing all the work. Tell us which one it is.

Illustration: A pool table with its rails removed and leaning against a garage wall, the bare slate frame exposed

After it comes apart

Stone, wood and felt are three different materials

Slate is inert, stone-like material. Heavy, stable, and it doesn't break down into anything once it's out of the table. The wood frame and rails are ordinary wood waste once they're apart. The felt tears loose during slate removal and isn't something that gets reused afterward.

None of that is one tidy stream. What can be reused or recycled stays out of the landfill; a mixed pool table load isn't always that clean.

Illustration: Three rectangular slate pool table pieces stacked flat on wooden blocks, with a roll of worn felt beside them

Who shows up

Crew and equipment

Every job runs out of an 8 × 12 ft dump trailer with 4 ft sides, about 14 cubic yards of space. Most jobs get a two-person crew, and we do all the lifting, loading and sweeping up.

Is it worth trying to sell first?

Unlike a lot of what we haul, a pool table still has buyers. What selling one takes, before you decide against it.

  • Marketplace or a local forum. Tables still move here, but serious buyers expect one already broken down and ready to load. A listing that says 'you disassemble it' sits far longer than one already in pieces.
  • Selling the slate separately. Restoration hobbyists do buy slate on its own, but only once it's out of the table, measured and staged for its own separate pickup. Real work before a buyer ever shows up.
  • Donating to a youth club or church group. Some will take a table in good, playable shape, but almost always want it already disassembled and delivered rather than picked up whole from a garage.
  • Taking it apart yourself. The disassembly itself is doable in an afternoon with two people. Carrying 170- to 275-pound slate pieces through a garage or down a hallway without equipment is where it turns into a real injury risk.

Table still in one piece?

Pool Table Removal questions

How much does a pool table weigh?

A standard 8-foot slate table runs north of 700 pounds assembled. The three slate pieces alone usually run 170 to 230 pounds each, more on a 9-foot table.

Do you take the table apart, or does it go out whole?

Apart, always, if it's slate. Rails come off, then the slate comes out piece by piece, the same way it went in when the table was first delivered.

Will you cut my pool table?

Only the wood frame and legs, and only if a doorway won't clear them whole. The slate always comes out in its own pieces, no cutting involved.

Is a non-slate table an easier job?

Yes. An MDF or slatron bed often weighs under 300 pounds total, lighter and simpler than a three-piece slate table.

Can the slate crack a tile floor if it's dropped?

It's a real risk with a piece that heavy, which is why we keep it flat and low and never rack it at an angle.

Locations served

Find us in your community

These are the cities we cover across Los Angeles County and north Orange County. Don't see yours? Call or text us and we'll let you know.

  • Downey
  • Whittier
  • Paramount
  • Long Beach
  • Norwalk
  • Bellflower
  • Santa Fe Springs
  • Anaheim
  • Compton
  • Lynwood
  • Glendale
  • Lakewood
  • Pasadena
  • Torrance
  • Fullerton
  • Los Angeles
  • Pico Rivera
  • Garden Grove
  • South Gate
  • Bell Gardens

Clear the garage or game room

Call Now Text Us